 |
712 Alternating
Relay
The 712 alternating relay is used to
equalize pump run time for duplex pumping systems. The solid
state alternating circuit drives an internal electromechanical
relay. A continuous power source and control switch are required.
|
 |
385 Mechanical
Latching Relay
The 385 relay is mechanically latched
and electronically reset. It can be furnished with two, four
or six sets of double throw contact. Mount directly to DIN rail
or panel. |
 |
711 Impulse
Sequencing Relay
The 711 impulse sequencing relay is used
for load sharing or toggling ON/OFF of the load. No need to
redirect the polarity of the input in order to change and maintain
states. |
 |
755 Magnetic
Latching Relay
The 755 magnetic latching relay, with
octal base, operates by using a pulsed input. A permanent magnet
maintains the last position until a redirected second pulse
moves the contacts back to the original state. |
 |
303 Magnetic Latching Power Relay
The 303 magnetic latching relay is designed
for 30 Amp loads using 0.25" quick-connect terminals. A
magnetic latching mechanism keeps the contact in last set position
until a separate redirect signal instructs it to change. Optional
blowout magnet to DC switching. |
 |
785 Magnetic Latching Relay
The 785 magnetic latching relay, with
square base, operates by using a pulsed input. A permanent magnet
maintains the last position until a redirected second pulse
moves the contacts back to the original state. |
